Vance & Hines Twin Slash Duals Thunderbird LT/Commander: 1810-2350
Vance & Hines is pleased to introduce Twin Slash Duals for the Triumph Thunderbird LT and Commander models. Twin Slash Duals feature large 4-inch round mufflers matched with 2.5-inch mid pipe heat shields, adding an extra touch of style and distinction to Triumph's heavy weight cruiser models. Marked by the signature Vance & Hines twin slash end treatment, Twin Slash Duals produce a deep and hearty rumble for the Thunderbird's massive 1700cc parallel twin powerplant.

- 4-inch Round Mufflers
- 2.5-inch Mid Pipe Heat Shields
- Optional Quiet Inserts Available
- Available in Chrome

NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES

WEIGHT
32.4 lbs.

UOM
EA

RETAIL PRICE
9.99
Select Destination, for Price with Shipping HERE>>>>> : To USA Price
Price: $679.00

British Customs Hog Slayer: BC902-075-V2-P
Description
The Thunderbird 1600 is an awesome bike. Not only does it run with Milwaukee’s finest right out of the box, with a little help, it's a bonafide Harley Killer. With a slight attitude adjustment in the pipes department, you can make your Triumph Thunderbird 1600 a true Hog Slayer. Developed over the course of many roasted tires and upset bar and shield brawlers, the Hog Slayer Exhaust delivers style, performance and a deep, throaty exhaust note.

Handcrafted from strong and good looking 304 stainless steel, the Hog Slayers use British Customs’ exclusive Louver Core Baffle design. It maximizes airflow, creates just the right amount of back pressure, sounds amazing and never needs maintenance or repacking.

The Hog Slayer not only breathes better for more low end torque, it makes a statement without offending. Engineered to be quiet at idle, the Hog Slayers don’t announce their presence until you’ve left the world in your mirrors, coming truly alive under full power.

The Hog Slayer system also shaves a full 12 pounds off the Thunderbird’s OEM exhaust. It’s slimmer and shorter than stock for style and the weight savings will be appreciated in the twisties.

All welds are ground for seamless finish. The mirror shine polished finish looks even better than chrome and will never rust, pit or corrode – plus it’s easier to maintain.

Features:

Deep, throaty sound
Wakes up bottom-end torque
Ground welds for seamless finish
Smooth power delivery throughout entire RPM range
Mechanical baffle, never needs repacking
Silencers and stainless band clamps included
Polished 304 stainless steel
Made in USA
Retains Cat

EFI System re-mapping required
Note: Updated version of Hog Slayers are designed to work with factory heat shields and does not have a BC logo stamped on it.

Click Additional Information below for Tune Mapping Numbers

Click shipping price below and select your destination for price with shipping included.


More Details
THUNDERBIRD AND STORM MODELS THAT DON'T HAVE SECONDARY AI NEED TO USE
MAP # 020363

STOCK 1600
MAP # 020306

1600 WITH BIG BORE AND 1700
MAP # 020310
BC Hog Slayer Exhaust: T-Bird/Storm Hog Slayer Exht (No CAT Delete Pipes) BC902-075-V2-PT-Bird/Storm Hog Slayer Exht (WITH CAT Delete Pipes): BC1609.3.700.P
Select Hogslayer Shipping Price: USEurope - Except UK
Price: $915.00

Custom Billet Exhaust Collars, For Complete Thunderbird Line Up
New production begins shipping 6/7/23

For the Thunderbird 1600 and Storm, Commander and LTs. After the header joint fell off my own Thunderbird, and left an ugly open joint I thought this would be a good place for a dress up piece!

Made in USA of billet aluminum and painted with high temp black giving it a two tone finish like the jug on the engine.

Select destination from drop down menu below, for price including shipping.


Select Destination, for Price with Shipping HERE>>>>> : To USA PriceTo Canada PriceTo Europe PriceTo UK PriceTo Australia Price
Price: $120.00

Powercommander V: Thunderbird 1600
Power Commander for the Thunderbird and Storm 2010-2014. Product description below.

Thunderbird 1700 LT and Commander select below.

Price Includes Free Shipping US, Overseas will be actual minus US Shipping and I will notify you by e-mail of total.

Contact British Customs for map



More Details
The New Power Commander V is loaded with tons of new features. Below you will find some Power Commander V features.
Reduced size from PCIIIusb (less than half of the size of PCIII)

USB powered from computer (9 volt adapter is no longer needed for programming)

2 position map switching function built in (map switch not included)

Gear input (allows for map adjustment based on gear and speed)

Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature)

With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear (for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables).
Unit has a -100/+250% fuel change range (up from -100/+100%). This allows more adjustment range for 8 injector sportbikes
10 throttle position columns (up from 9 on PCIIIusb)

Enhanced “accel pump” utility (increased adjustment and sensitivity ranges)
NEW Power Commander V w/ Built in Ignition Control

On select models, gain control over fuel delivery AND timing with the new Power Commander V with fuel and ignition control. The best of both worlds, now you can realize all the benefits of the Power Commander V and the Ignition Module 5 wrapped in a single enclosure. This Power Commander V is available for select twin cylinder engines.
Retains all of the standard Power Commander V fuel control features
Allows +/- 20 degrees of timing adjustment
Map Switch Input – change maps on the fly
Adjust timing per cylinder
Raise your Rev Limit (only available on select models)
Built In Launch Limiter.

Price: $379.00

Cool It® Thermo Tec Header Wrap
Cool It® Thermo Tec Wrap. Choose from Black or White. 2" x 25' roll
Exhaust Insulating Wrap not only helps to protect you from dangerous pipe burns, it also increases horsepower and fuel efficiency.
Maintains hotter exhaust gases inside the pipe allowing them to exit faster due to decreased density.
Withstands temperatures up to 2000°F

To secure the insulating wrap, use the cut-to-length Snap Strap Clamp Kit

To protect the wrap and seal the pores, we recommend using our Hi-Heat Coating after installation

From drop down menu below, select color then select destination for price with shipping included.





Color: WhiteBlack
Select Destination, for Price with Shipping HERE>>>>> : To USA PriceTo Canada PriceTo Europe Price
Price: $42.00

Cool It® Thermo Tec Snap Straps Clamp Kit: 95131
Cool It® Thermo Tec Snap Straps Clamp Kit.
Recommended for use with Header wrap
18" x 6 Pieces stainless steel.

Select from drop down menu below destination for price including shipping. Price is calculated for standalone purchase and will be discounted and refunded if purchased with wrap.


Select Destination, for Price with Shipping HERE>>>>> : To USA PriceTo Canada PriceTo Europe Price
Price: $22.95

High Heat Header Wrap Coating Paint
Cool It® Thermo Tec Designed for use on metal surfaces or over woven type exhaust wrap.
Protects metal surfaces up to 1200°F
Insulates and seals the pores of exhaust insulating wrap up to 2000°F

Black Satin or Aluminum Satin 11 oz. aerosol spray can, NOT available for overseas shipment. Must be shipped by ground in U.S.

Stand alone price, shipping will be discounted and refunded if purchased WITH header wrap.


HI-HEAT COATING SPRAY PAINT: Black Satin 11 oz. aerosol spray can: 95123Aluminum Satin 11 oz. aerosol spray can: 95124
Price: $16.00

Triumph Large Heat Shield Clamp: T2202421
Genuine Triumph exhaust heat shield clamp, the large one that goes on back half of shield.
One clamp.

Select destination from drop down menu below for price with shipping included.

Select Destination, for Price with Shipping HERE>>>>> : To USA PriceTo Canada PriceTo International Dest Price
Price: $5.69

Triumph Small Heat Shield Clamp: T2202440
Genuine Triumph exhaust heat shield clamp, the small one that goes on forward half of shield.
One clamp.

Select destination from drop down menu below for price with shipping included.
Price: $7.50

EMGO Coctail Shaker Exhaust.
EMGO quality at an affordable price, comes with removable baffle.

1.74 in. inlet with reducers to fit 1 5/8 and 1 1/2 in pipes.

Select shipping destination below for price with shipping included.

Select Destination, for Price with Shipping HERE>>>>> : To USA PriceTo Canada PriceTo Europe PriceTo UK PriceTo Australia Price
Price: $150.00

Hogslayer CAT Delete Elbows: BC901-102-BR
Stand alone purchase of the stainless steel elbows that will allow you to remove the CAT on your Thunderbird for both stock pipes and Hog-slayers. MAY, work with other aftermarket pipes.

Price includes shipping to US destinations.
Select Destination, for Price with Shipping HERE>>>>> : To USA PriceTo Canada PriceTo Europe PriceTo UK PriceTo Australia PriceTo Middle East PriceTo Asia & India PriceTo International Dest PriceTo Western EuropeTo Eastern Europe & Greece
Price: $99.99